• Menu

Pioneer Equipment California


  • Find Us
Fresno
2545 South Sarah St.
Fresno, CA 93706

Directions
Reedley
953 "G" St.
Reedley, CA 93634

Directions
pioneer banner 1663 x 125 px
» Browse All Equipment
» Advanced Search

Land Pride RCB6615

Land Pride / Rotary Cutters / RCB6615 Series Rotary Cutters / RCB6615

RCB6615 for sale at Pioneer Equipment California

Land Pride RCB6615 for sale at Pioneer Equipment California

Double tap to zoom

Land Pride RCB6615 for sale at Pioneer Equipment California

 

Features

Features Benefits
Surpassed rugged
industry standards		 All Land Pride Cutters have been designed and tested and meet rigorous voluntary
testing procedures.
Factory assembled Saves customer set-up time and money. Adjustments should always be made by dealer.
7 Year gearbox warranty*
 Shows confidence in gearbox integrity.
250 HP Divider gearbox
210 HP center & wing gearboxes		 A rugged heavy built gearboxes capable of handling heavy cutting applications.
Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life.
2 3/8" Output gearbox shaft Large output shaft handles shock loads better.
Input driveline:
Cat. 6 CV or Cat. 5 Conventional		 Holds up to shock loads and harsh mowing conditions.
Easy Greasable drivelines Drivelines have access holes for greasing the U-joints and to grease the inner profiles.
2 or 4 Plate slip-clutch Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline
when impacts are encountered.
High blade tip speed Allows clean cutting of material and even distribution. See Specifications for actual FPM.
6" Blade overlap Eliminates skipping during turns.
High cutting capacity Can cut brushy areas with saplings up to 4 1/2".
12" Deck height Handles heavy cutting, which reduces balling-up of cut material under the deck.
Left wing rotates clockwise Better discharge of material. Picks up tractor tracks.
3/16" Stump jumper backed with a
1" thick mounting plate		 Heavy round stump jumper for protecting the gearbox seal and gearbox output shaft.
Can hold up to tough conditions.
Spindle Nut Protected Spindle nut and threads extending beyond the nut are guarded to protect against
damage from hitting solid objects.
10 gauge smooth deck top Reduces accumulation of debris and is easier and faster to clean.
7 Gauge smooth deck bottom Heavy deck design holds up to harsh conditions. No bottom obstructions.
Replaceable 1/4" side skirt Reduces debris piercing possibilities. Can be replaced if damaged.
Self-leveling hitch Reduces drawbar wear by keeping hitch level while going through ditches.
Hinged wing sections Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and
hollows can cause uneven cutting.
1" Solid hinge rods Larger diameter hinge rod gives greater strength to the cutter and in the hinge area
itself.
Wing transport lock pins Holds transport wings in the folded-up position in case of hydraulic pressure loss.
Enclosed front to rear dual leveling
rods		 Dual leveling rods enable the cutter to pull equally on the rear axle during travel over
rough terrain. Many competitors only use one leveling rod.
5-Bolt hubs 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Drain holes in wheel rims Allows water to drain from wheels mounted on folded-up wings.
Helps prevent paint deterioration and rusting to the wheel rims.
Spring-cushioned trailing arms Provides independent suspension, cushions loads on drawbar.
Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing the entire axle.
Simply remove one bolt to replace damaged spindle.
Pre-cut chamber Allows grass and vegetation to stand back up prior to cutting for a more complete cut.
Slow moving vehicle sign (SMV) Required for transporting on roadways and mowing along side roads.
Rear axle pull rings Aids in getting unit out of soft ground conditions.
Rephasing wheel cylinders Allows the cutter to be levelled using hydraulic cylinders verse mechanical turnbuckles.
Independent wing hydraulics Wing hydraulics are plumbed independently to allow the user to raise one wing at a time,
which can aid in going through narrow spaces.
Dual-acting wing cylinders Allows wings to be folded inward beyond 90o for a narrow 7'-5 1/4" transport width.
Greasable wing folding hinges Provides for a long hinge life and allows the wings to fold up and down with less stress.
Reinforced leading edge Front of deck can withstand heavy brush and saplings.
Collapsible leveling rods Prevents damage and failure to leveling rods.
1" Leveling rods Large diameter leveling rods provide superior supporting strength over rough terrain.
Double swivel hitch option Great for uneven terrain, reduces drawbar wear. Must use spacer washers on drawbar.
Bar-tite hitch option Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Walking tandem axle option Allows for a smoother pull in undulating terrain.
Wheel options Laminated tires: Eliminates flats.
Airplane tires without foam filling: Give better cushion while transporting.
Airplane tires with foam filling: Give better cushion while transporting and can’t go
flat.
Deck rings (optional) 1/2" x 3" full welded deck ring keeps blades from damaging the deck.
Mechanical Winch (optional) Aids in folding the cutter in the event of hydraulic failure.

Specifications

  • 50-250 HP
  • 15' Width
  • 4.5" Cutting capacity
  • 7 Gauge bottom, 10 gauge top
  • 12" Deck height
  • Spring cushioned axle
  • Rephasing cylinders on wing axles for leveling the wings
  • Independent wing hydraulics
  • Optional deck rings
  • Optional walking tandem axles on center and wings