Kubota R430

R430 for sale at Pioneer Equipment California

Kubota R430 for sale at Pioneer Equipment California

Double tap to zoom

Kubota R430 for sale at Pioneer Equipment California



Comfortable Work Station

Comfort and convenience are the keys to operator efficiency. The working station is mounted on rubber ISO mounts to minimize sounds and vibrations. Increase your comfort level in all seasons with an enclosed heated and A/C cooled cab.  

Powerful Kubota Engine

The R430 boasts a gross rating of 47.6 HP (SAE J 1995) that provides the extra muscle needed for all of the chores that the loader is capable of performing.  

Limited Slip Differential

Mud, sand, snow are no problem for the R430's front limited slip axle. If a front wheel slips, the power is transferred to the opposite wheel to restore traction. 

Load Sensing Transmission

As the travel and loading conditions change, the R430's transmission automatically shifts to compensate to provide maximum torque and speed for efficient ground speed operation. The manual switch can be operated with a convenient button located on the loader control level.  

Rear Backhoe

The R430 takes versatility to a new level in compact wheel loaders with an optional backhoe attachment. The RBK4009SA backhoe allows the operator to dig a trench up to seven feet deep and 24 inches wide.  

Hybrid Link Design

The well-balanced cylinder position of the Z link provides strong bucket break out forces and a lift path almost parallel to the ground for superior reach and lift.  


Model R430
Model D1803-CR-TIE4-WL5
Emission certification Tier 4
Output (SAE J1995 gross) HP (kW)/rpm 47.6 (35.5) / 2600
Output (SAE J1349 net) HP (kW)/rpm 44.5 (33.2) / 2600
Displacement cu. In (cc) 111 (1826)
Type Hydrostatic transmission
Overall length ft. in. (mm) 14' 4" (4355)
Overall height ft. in. (mm) 8' 3" (2515)
Overall width (w/o bucket) ft. in. (mm) 4' 12" (1520)
Ground clearance in. (mm) 11" (280)
Auxiliary circuit  
Auxiliary hydraulic flow gpm (£ /min.) 11.1 (42.1)
Auxiliary hydraulic pressure psi (mpa) 2697 (18.6)
Drive System  
Tire size 12.5 / 70-16-8PR
Travel speed Low / High mph (km/h) 3.0 (4.8) / 12.4 (20.0)
Max. traction force 5485 (24.4)
Front axle traction lock Limited slip differential
Articulation angle deg. 40 (each direction)
Angle of rear frame oscillation deg. ±8
Loader clearance circle ft.in. (mm) 12' 1" (3695)
Turning radius track circle ft. in. (mm) 10' 1" (3085)
Enclosed wet disc
Spring applied hydrauliC released wet disc
Lifting specifications  
Tipping Load (straight)
w/ bucket (IS014397-1) Ibs. (kg)
w/ pallet forks (IS014397-1) Ibs. (kg)
5335 (2420) I 5743 (2605)
3494 (1585) I 3770 (1710)
Tipping Load (full turn)
w/ bucket (IS014397-1) Ibs. (kg)
w/ pallet forks (IS014397-1) Ibs. (kg)
4596 (2085) I 4949 (2245)
3009 (1365) I 3251 (1475)
Rated operating capacity (50% of lipping load)
w/ bucket (IS014397-1) Ibs. (kg)
w/ pallet forks (IS014397-1/SAEJ1197) Ibs. (kg)
2298 (1042) I 2474 (1122)
1504 (682) I 1625 (737)
Operational specifications  
Standard bucket capacity 0.5
Breakout force lbs. (kN) 5215 (23.2)
Lifting capacity at ground level lbs. (kN) 3687 (16.4)
Loader raise / lower time sec. 4.4 / 3.3
Fuel tank gal. 14.3 (54)
Hydraulic system gal. 15.3 (58)
Hydraulic reservoir gal. 11.1 (42)
Oprating weight (including operator weight @ 165 lbs.) 7758 (3519) / 8232 (3734)